Guide to renovating your pool this summer

Summer is just around the corner, and with it comes hot days, bright sunshine and, of course, endless dips in the pool. However, before you dive headlong into the water, it's time to take a good look at your pool and ask yourself: is it in a condition to enjoy it to the full? If the colour is no longer the same, the coping stone is worn out or there are some cracks that have become noticeable over time, then it's time to renovate your pool.

Renovate your pool this summer will not only keep it looking pristine, but will also ensure a safe, durable and easy-to-maintain space. Plus, with the right tools, such as Renovatec Corona for the edges and a good swimming pool paint such as Tecpiscel Wyou can give it a new lease of life without the need for complicated work or exorbitant budgets. Below, we tell you everything you need to know to make your pool look as good as new this summer, with an easy and effective step-by-step process.

How do I know if my pool needs renovation?

Before starting with a pool renovationIt is advisable to make a general inspection to determine which aspects need more attention. Look for cracks in the structure, stains on the coating or worn areas around the edges. If the surface is rough or the paint has peeled, it is a sign that it needs a new coating. Also check the coping stone, as it will is one of the parts that suffers the most over time due to exposure to sun, water and chemicals..

Step 1: Emptying and deep cleaning

The first practical step is to empty the pool completely. This process must be carried out carefully, making sure that water drains properly without affecting the environment. Once empty, it is time for a thorough cleaning to remove any accumulation of dirt, algae and chemical residues.

To do this, you can use a pressure washer or a mixture of water and Tecnoclean swimming poolsThe water content can be reduced if you have a lot of dirt, specialised for swimming pools. It is important to scrub all surfaces thoroughly to ensure that no algae or limescale deposits are left behind (wear gloves and safety goggles).. The cleaner the surface, the better the adhesion of the new materials to be applied later.

If you notice that the paint is peeling in some areas, use a putty knife or sander to remove any loose chips. A uniform surface will ensure a much more professional finish..

Step 2: Repairing cracks and flaws

Once the pool is clean and dry, it's time to repair any cracks or flaws that you have identified in the initial assessment. Cracks can appear due to natural wear and tear or temperature changes, and if not treated in time, can lead to leaks and more serious damage.

To seal them, use masitec flex w. Be sure to follow the manufacturer's instructions and allow the material to dry for the recommended time before continuing with the renovation process. It is also important to check the joints and seams between the pool and the edges to avoid future problems.

Step 3: Renovation of the coping stone

Pool coping and coping stone are areas that suffer a lot of wear and tear, as they are in constant contact with water, chemicals and the sun's rays. If you notice that they have lost their original colour or are showing signs of ageing, it is time to restore them with Renovatec Corona.

This product is specifically designed for renewing and protecting the coping stone and pool edges without the need to change all the material. Implementation is simpleFirst scrape all areas with mortar or stone that are not resistant, sweep away all the dirt, then, with a hose, wet the stone a little and apply our product with a sprayer. Tecnoclean Swimming Pools mixed with 3 - 4 parts of water, spray in sections (keep the product applied and acting on the stone for no more than 15 - 20 minutes) then rinse with a pressure washer or pressurised water if not available. we will remove all the dirt embedded in the stoneAfter cleaning, make sure that the surface is completely dry, after cleaning you should leave it to dry for 2 to 3 days. Then apply Renovatec Corona with a roller or brush, the first coat diluted with 20% of water, allowing the product to absorb properly, let it dry for at least 6 hours and apply a second coat. pure termination or with a maximum of 5% of water

The great thing about this treatment is that it not only improves the appearance, but it also provides an additional layer of protection against moisture and UV rays. This way, the edges of your pool will stay cleaner for much longer without the need for frequent maintenance. If you want to know more about this product, visit Renovatec Corona.

Step 4: Application of the new pool paint

Once the pool surface is clean, dry and free of imperfections, it is time to apply the new paint. Choose a special paint for swimming pools is key to ensuring a durable, water- and chemical-resistant finish, a good choice is Tecpiscel W in blue or white.

Before starting, mix the paint well to ensure a uniform composition. Use a special roller for swimming pools type felt roller o microfibre and start painting the walls from top to bottom. Then, continue with the floor, applying thin layers to avoid product build-up2 coats will be enough, apply a third coat if your walls are very deteriorated.

The drying time between coats is critical. Ideally, wait at least 24 hours before applying a second coat.. Do not rush to fill the pool prematurely, as the paint needs a curing period to adhere properly. Generally, it is recommended to wait 5 to 7 days before refilling.

Step 5: Filling and chemical equilibrium of the water

When the paint has dried completely and the edges are ready, it is time to fill the pool again. This process should be done gradually to avoid sudden impacts on the structure.

Once the pool is full, it is essential to balance water chemistry levels. Adjust the pH and alkalinity to prevent the water from affecting the new paint. A balanced pH also helps to keep the water crystal clear and prevent algae and bacteria growth.

In addition, make sure the filtration system is in perfect condition before using the pool.. A pump with clean sand as the silex sand Tecno Prodist and in good working order ensures that the water is kept in optimum condition throughout the summer.

Enjoy your renovated pool

After all the effort and dedication, the most awaited moment has arrived: enjoying your pool as good as new. With a renewed colour, impeccable edges and crystal clear water, the space is transformed into the perfect place to relax, share with the family and cool off on the hottest days.

Renovate your pool this summer not only improves their appearance, but also contributes to a longer service life and facilitates their long-term maintenance. With products such as Renovatec Corona and specific quality paints for swimming pools such as Tecpiscel WThe process becomes much simpler and more effective. The best thing is that with good aftercare, the result will remain impeccable for much longer, allowing you to enjoy it without worries.

So, if you've been on the fence about whether or not to renovate your pool this season, the answer is clear: now is the perfect time! With a little planning, the right materials and some patience, you can completely transform your pool and prepare it for an unforgettable summer..