IMPERFLEX PLUS 2C by Tecno Prodist - Flexible bi-component waterproofing mortar for swimming pools, showers, walls, basements, etc.

Description

• IMPERFLEX PLUS 2C is a flexible two-component coating ideal for waterproofing swimming pools, basins, flower boxes, shower trays, under tiles on terraces, etc. It is also very effective for solving problems of damp in basements, houses, walls, garages, etc. It can be used both indoors and outdoors. Thanks to its flexibility it prevents the formation of cracks. Suitable for drinking water
• POSITIVE AND NEGATIVE PRESSURE WATERPROOF, Waterproof under positive pressure (swimming pools, ponds, flower boxes, terraces, etc.) and negative pressure (walls, basements, lift shafts, garages, etc.) it allows water vapour to pass through, allowing the surface to breathe. DO NOT APPLY ON PLASTER, PAINT, TAR OR NON-POROUS SUBSTRATES.
• INSTRUCTIONS FOR USE: The substrate must be resistant, clean, free of grease or contaminants, in the event of cracks or holes, use our mortar M-REPAR FACHADAS or M-REPAR SUELOS beforehand, in the event of waterways, use M-REPAR RAPID beforehand. IMPERFLEX PLUS 2C APPLICATION, mix component A with component B using a low speed mixer for 3 - 5 min. and leave the mixture to stand for 5 min.
• Wet the substrate and apply IMPERFLEX PLUS 2C with a brush or trowel on a damp substrate (not soaked), apply the first coat vertically, leave to dry for a minimum of 12 hours, dampen the surface and apply a second coat horizontally, the minimum consumption per coat should be approx. 1.5 kg. In the case of swimming pools or ponds, do not fill until at least 7 days after application. Do not apply below 8ºC and do not apply above 30ºC. Do not apply when there is a risk of rain or frost.
• TECNO PRODIST is innovation, technology and state-of-the-art products, PRODIST GROUP is a guarantee of quality.