TERMOMUR FLEX by Tecno Prodist - Ready-to-use putty paste, smoothing and thermal insulation, interior or exterior,otelé

Description

• TERMOMUR FLEX, ideal solution to thermally insulate interior and exterior walls, thickness of only 1 to 5 mm, easy application and sanding, avoids cracks thanks to its flexibility, 2 in 1, smoothes and insulates at the same time, covers all types of surfaces, great adhesion even on ceramic and tile substrates, metal, etc., ideal as a complement to our thermal paints TERMOIMPER, TECPINT TERMIC, TECPINT SOL SILICATO TERMIC, etc.
• ECOLOGICAL, THERMAL - ENERGY SAVING, does not affect human health, as it contains natural raw materials, is being used in GREENBUILDING (sustainable construction) and in ECO-ARCHITECTURE, is very breathable, is used in both old and modern buildings, for interior or exterior, allows the substrate to maintain its breathability, as the putty does not block the pores, provides thermal insulation reducing the consumption of A.A. or heating, prevents condensation and humidity.
• IDEAL FOR COLD OR HOT WALLS, WITHOUT AIR CHAMBER OR WITH BAD THERMAL INSULATION, it corrects the thermal insulation creating a thin but effective air chamber thanks to its spheres that form millions of air microcells providing a highly effective thermal insulation, both for cold and heat, indoors and outdoors, it is very breathable, sound absorbing, improves interior acoustics, improving the problem of noise.
• INSTRUCTIONS FOR USE: The substrate must be perfectly clean, free of dust and completely dry. Clean degraded substrates (poorly adhered paints, with damp stains, etc.). On dusty or sandy surfaces, brush beforehand and apply TECPINT IMPRIMACIÓN or TECPINT PRIMER GEL beforehand. In the case of cracks, widen the crack, remove the dust and apply TECPINT IMPRIMACIÓN or TECPINT PRIMER GEL, then apply TERMOMUR FLEX, avoiding leaving air pockets inside.
• "APPLICATION: Ready-to-use product, up to 3% of water can be added if necessary. Apply with a special putty roller (putty roller), and finish with a spatula, manual window cleaner, or apply with a trowel. It is suitable for putty spraying machines. A thickness of more than 5 mm is not recommended, as cracks may appear. 2. In case of 2 coats, let dry 4 to 6 hours between coats (variable according to thickness). We recommend sanding (grit 60-120) after 24 hours".
• TECNO PRODIST is state-of-the-art technology and products, PRODIST GROUP is a guarantee of quality.